SMART HVAC & INTEGRATION

Dropair Pro7

A fan-coil control interface offered in AC and DC versions. Select the version to match the fan motor, valve and installation.

FCU Thermostat Interface
AC Fan Motor Applications
On/Off or Modulating Valves
Historical Guide Available

Pro7 Historical Installation Guide

V1.2 · 10 November 2020 · English PDF · 13 pages

Download PDF
THE APPLICATION

Connect supported fan coil controls to a 24 VAC smart thermostat.

FCU thermostat interface. Confirm the complete equipment and control arrangement before selection.

Fan coil unit

Match AC motor and valve arrangement

Dropair Pro7

FCU thermostat interface

24 VAC smart thermostat

Use the matched thermostat cable

Conceptual application overview. It is not a wiring diagram; use the documentation for the exact supplied hardware and configuration.

Historical Technical Specifications

Dropair Pro7 — FCU thermostat interface.

Documented models
Pro7-AC and Pro7-DC
Application
Chilled-water FCUs with AC fan motors
Pro7-AC
Documented 2/4-pipe on/off-valve arrangements
Pro7-DC
Documented AC fan motor with modulating valve
Dimensions / weight
43 × 43 × 28 mm / 58 g, per 2020 guide
Input
100–240 VAC, 50/60 Hz
AC output
24 VAC, 60 Hz
DC output
0–10 VDC
Motor rating
100–240 V, 3 A
Valve rating
100–240 V, 80 mA
Power consumption
0.8 W, per historical specification table
Thermostat
Compatible 24 VAC thermostat with matched cable
Fan motor
AC motor; the guide directs 0–10 V DC fan motors to Pro6X
Control connector
2 × 5 connector, as shown in the guide
Terminals
0.3–1.0 mm² conductors, per guide
Terminal torque
0.4 N·m maximum
Enclosure
White ABS + PC FR3010, per 2020 guide
Indicators
Red power and green thermostat-signal LEDs
Required checks
Motor current, valve type, cable, hardware and firmware
Document status
Historical V1.2, 10 November 2020
Current installation
Confirm supplied model and current documentation

All numerical Pro7 ratings above are historical values from the 2020 V1.2 guide. They are not a claim that every currently supplied Pro7 has the same configuration. Confirm the exact product label, load limits and wiring before selection.

Product Description

Select the correct FCU interface

The historical Pro7 guide describes interfaces for chilled-water fan coil units using AC fan motors. Pro7-AC covers documented on/off-valve arrangements; Pro7-DC covers documented modulating-valve arrangements with an AC fan motor. The DC model name does not mean that every DC fan motor is supported.

Confirm the motor and valve arrangement

Record the pipe arrangement, fan motor type, valve type and load current. The guide directs 0–10 V DC-controlled fan motors to Pro6X. Compare the existing thermostat wiring with the documented solution and confirm the supplied Pro7 variant before ordering.

Thermostat and commissioning requirements

The guide documents 24 VAC smart thermostat connections using a matched cable and model-specific terminal configuration. It includes older Nest, Ecobee, Lyric and Control4 examples; compatibility with a current thermostat model must be checked separately. Test the original FCU, isolate power, complete wiring to the applicable instructions, then verify the available heating, cooling and fan functions.

Using the historical manual

The downloadable V1.2 guide is dated 10 November 2020. Use its technical information to identify the documented arrangement, and request current installation guidance for the supplied hardware. Do not use a Pro7 diagram for the separate HA-adapter simply because the housings appear similar.

Documentation and next steps

Pro7 Historical Installation Guide — V1.2 · 10 November 2020 · English PDF · 13 pages.

Browse all product manuals or request compatibility advice and a quotation.